4 Window Treatment Installation Tips


1. Measure. And then measure again. When it comes to installing blinds, nothing makes the task more miserable than finding out your measurements were off. Not wide enough and you are left with a bad light gap. Too long or short and the bottom is all messed up! So measure the window once, then go online and check out Bali’s measuring instructions. Then maybe measure one more time just to be sure.

Screen Shot 2016-05-02 at 5.03.23 PM

2. Check your window. Make sure your window frame supports the type of mount you’d like. If you want an inside mount, make sure you don’t have a full metal frame as you can’t screw in to that. If you do, you can always plan an outside mount—problem solved!


3. Painters tape is your friend! For exact installation, we always use painters tape to mark where to install the screws after we measure so we aren’t guessing or leaving any marks on the walls or window frames.

4. Watch and learn. If you have a hard time visualizing the instructions provided with the blinds, hop on over to the Bali site for an amazing collection of videos that walk you through each and every step!

Screen Shot 2016-05-02 at 4.58.36 PM

With these these tips, the instructions that come with your blinds, and watching installation videos, you will be able to install your amazing blinds. Now go redo your room with some new Bali blinds and shades!

Leave a Reply